Skip to main content

Legal

Tax & Accounting

Trade & Supply

Risk & Fraud

News & Media

Books

Developers

Scanners

Fujitsu Ricoh FI- 8170 scanner setup instructions

PaperStream Capture can be used to create PDF or TIFF files of your client’s source documents to be uploaded to SurePrep.
Complete the installation of PaperStream IP drivers. Then follow these instructions to select the driver:
Open PaperStream Capture and select
Switch Modes
.
Select
Select Scanner
 then
PaperStream IP FI-8170
.
Then select
Scanner Settings
.
  1. Enter the
    File Name
     (that is, default naming scheme)
  2. In the
    Scanner Driver Profile
     field, select
    001 : B&W Default
  3. Select
    Scanner settings
     next to the
    Scanner Driver Profile
     field.
In the Scanner Settings window, select the
Basic
tab to expand the settings.
For
Image Mode
 select
Black & White
.
For
Paper Source
 select
Feeder (Both Sides)
Resolution
 select 300 dpi
For
Paper Size
 select
Letter
 or
Legal
 depending on document size.
Select
Off
 for
Carrier Sheet
 and
Front/Back Merging
Select the
Image
 tab to expand the settings.
For
Black & White Method
 select
Dynamic Threshold (iDTC)
.
For
Tone adjustment
 select
Automatic (Default and grayed out)
.
For
Cleanup
 turn it
On
 and adjust the following:
  • Character Thickness
     should be zero (0)
  • Character Augmentation
     should be zero (0)
  • Noise Removal
     should be zero (0)
  • Background Pattern removal
     should be zero (0)
  • The White Level Follower
     should be
    Automatic
In the
Image
 tab:
  • Vertical streaks
     are
    Off
    .
  • Dropout Color
     is
    White
  • Inverted Image
     is
    Off
Select the
Page
tab to expand the settings.
Select
Cropping
. Then select
None
 in the
Cropping
 section, and
Black
 in the
Background
 section.
Turn
Split image
 off and select
Rotation
 to
For
Edge Correction
, make sure
Edge Repair
 and
Edge Filler
 are off.
Turn
Hole Punch Removal
 on and select
White
for Filled color and
Standard
 for Mode.
Turn
Blank Page Detection
 on and set
Content Sensitivity
 to zero (0).
Select the
Page Feeding
tab to expand the settings.
Set
Manual Feed Mode
 to
Hardware Setting
.
Set
Multifeed Detection
 to
Detect
. In the
Action
 section, select
Stop and Show Image
. In the
Condition
 section, select
Hardware Setting
.
Turn
Paper Protection
 and
Pre-Pick
 to
On
.
Select
Batch
tab to expand the settings.
Use the table to determine what to select for the following settings.
Batch Setting
Select
Assisted Scan
Off
Continuous Scan
Automatic
Job Control
Off
Patch Code Detection
Off
Barcode Detection
Off
Automatic Profile Selection
Off
Select the
Endorser
tab to expand the settings, and set
Digital Endorser
 to
Off
.
On the toolbar, select the
Save
 icon to save the settings and create a profile.
On the
Save Profile
 window, enter
SurePrep
in the
Profile name
 field, then select
OK
.
The SurePrep profile is ready to use.

This article applies to:

  • Product: SurePrep
  • Subject: Scan
Chat now

error-icon

Triva isn't available right now.

Check out the support page for our phone number and hours

error-close