Canon DR 9080C with Capture Perfect 3

Canon DR 9080C and Capture Perfect 3

Use Capture Perfect 3.0 to create PDF files to upload to 1040SCAN.
  1. Open Capture Perfect 3.0 by selecting
    Start
    , then
    Programs
    , then
    Capture Perfect 3.0
    .
  2. Select
    Scan
    , then
    Select Scanner
    .
  3. This opens a window that lists the scanner names. Select
    Canon DR-9080C
    and then
    OK
    .
  4. Select
    Scan
    , then
    Scanner Setting
    .
  5. This opens a window
    Canon DR-9080 on STI – 001
    . Adjust the following settings
    • Mode: Advance Text Enhancement
    • Page Size: Letter – 8.5 x 11 in
    • Dots per inch: 300 dpi
    • Brightness: 128
    • Margin: 0.00”
    • Scanning Side: Simplex
    • Ratio of black pixel: 2.0%
    • Feeding Option: Standard feeding
    • Batch Selection: None
    • Prescan: Uncheck the box
  6. Once you configure the above settings, select
    More
    .
  7. This opens the
    Advance Settings
    window. Adjust the following settings:
    • Double Feed Detection
    • Detect by Length: Uncheck the box
    • Detect by Ultrasonic: Uncheck the box
    • Detect Page Size: Image Width
    • Deskew: by Roller
    • Document Orientation: 0 degrees
    • Other Settings
    • Text Orientation Recognition: Uncheck the box
    • Staple detection: Uncheck the box
    • Verify count: Uncheck the box
    • Reverse side: Uncheck the box
  8. Once you configure the above settings, select
    Gamma
    .
  9. Adjust the following settings:
    • Custom: Check the box
    • Select dropdown: Front – Gray
    • Input method
    • Factor: 3.0
  10. Select
    OK
    and then
    Filter
    from
    Advanced Settings
    window.
  11. Adjust the following settings:
    • Back Side Brightness: Uncheck the box
    • Color drop-out
    • Front: None
    • Back: None
    • Other Settings
    • Erase Dot: Check the box
    • Erase Notch: Check the box
    • Border Removal: Check the box
  12. Once you configure all the above settings, select
    Save
    .
  13. In the
    Save User Preference
    window, enter
    SurePrep
    and select
    OK
    .
  14. Select
    OK
    to save your settings.
  15. Select
    Scan
    , then
    Scan Batch to file
    to scan the documents.
Chat now

error-icon

Triva isn't available right now.

Check out the support page for our phone number and hours

error-close